Manufacturing Technology

Classes

INT 101: DC FUNDAMENTALS

Class Program
Credits 3 Lab Hours 1 Theory Hours 2
This course provides an in-depth study of direct current (DC) electronic theory. Topics include atomic theory, magnetism, properties of conductors and insulators, and characteristics of series, parallel, and series-parallel circuits. Inductors and capacitors are introduced and their effects on DC circuits are examined. Students are prepared to analyze complex DC circuits, solve for unknown circuit variables and to use basic electronic test equipment. This course also provides hands on laboratory exercises to analyze, construct, test, and troubleshoot DC circuits. Emphasis is placed on the use of scientific calculator and the operation of common test equipment used to analyze and troubleshoot DC and to prove the theories taught during classroom instruction.

INT 103: AC FUNDAMENTALS

Class Program
Credits 3 Lab Hours 1 Theory Hours 2
This course provides an in-depth study of alternating current (AC) electronic theory. Students are prepared to analyze complex AC circuit configurations with resistors, capacitors, and inductors in series and parallel combinations. Topics include electrical safety and lockout procedures, specific AC theory functions such as RLC, impedance, phase relationships, and power factor. Students will be able to define terms, identify waveforms, solve complex mathematical problems, construct circuits, explain circuit characteristics, identify components, and make accurate circuit measurements using appropriate measurement instruments. They should also be able to perform fundamental tasks associated with troubleshooting, repairing, and maintaining industrial AC systems.

INT 112: INDUSTRIAL MAINTENANCE SAFETY PROCEDURES

Class Program
Credits 3 Lab Hours 0 Theory Hours 3
This course is an in-depth study of the health and safety practices required for maintenance of industrial production equipment. Topics include traffic, ladder, electrical, and fire safety, safe work in confined spaces, electrical and mechanical lock-out procedures, emergency procedures, OSHA regulations, MSDS Right-to-Know law, hazardous materials safety, and safety equipment use and care. Upon course completion, student will be able to implement health and safety practices in an industrial production setting.

INT 113: INDUSTRIAL MOTOR CONTROLS I

Class Program
Credits 3 Lab Hours 4 Theory Hours 1
This course is a study of the construction, operating characteristics, and installation of different motor control circuits and devices. Emphasis is placed on the control of three phase AC motors. This course covers the use of motor control symbols, magnetic motor starters, running overload protection, pushbutton stations, multiple control stations, two wire control, three wire control, jogging control, sequence control, and ladder diagrams of motor control circuits. Upon completion, students should be able to understand the operation of motor starters, overload protection, interpret ladder diagrams using pushbutton stations and understand complex motor control diagrams.

INT 117: PRINCIPLES OF INDUSTRIAL MECHANICS

Class Program
Credits 3 Lab Hours 3 Theory Hours 2
This course provides instruction in basic physics concepts applicable to mechanics of industrial production equipment. Topics include the basic application of mechanical principles with emphasis on power transmission, specific mechanical components, alignment, and tension. Upon completion, students will be able to perform basic troubleshooting, repair and maintenance functions on industrial production equipment.

INT 118: FUNDAMENTALS OF INDUSTRIAL HYDRAULICS AND PNEUMATICS

Class Program
Credits 3 Lab Hours 2 Theory Hours 2
This course includes the fundamental concepts and theories for the safe operation of hydraulic and pneumatic systems used with industrial production equipment. Topics include the physical concepts, theories, laws, air flow characteristics, actuators, valves, accumulators, symbols, circuitry, filters, servicing safety, and preventative maintenance and the application of these concepts to perform work. Upon completion, students should be able to service and perform preventative maintenance functions on hydraulic and pneumatic systems.

INT 119: PRINCIPLES OF MECHANICAL MEASUREMENT AND TECHNICAL DRAWING

Class Program
Lab Hours 2 Theory Hours 1
This course provides instruction in the use of precision measuring tools and the interpretation of technical drawings. Topics include the use of calipers, micrometers, steel rules, dial indicators, identifying types of lines and symbols of technical drawings, recognition and interpretation of various types of views, tolerances, and dimensions. Upon course completion, students will be able to use precision measuring tools and interpret technical drawings.

INT 120: CONCEPTS OF DIRECT CURRENT

Class Program
Credits 5 Lab Hours 4 Theory Hours 3
This course provides an advanced study of direct current (DC) concepts and application principles. Specific topics include safety, terms and symbols, electrical theory, Ohm's law, power law, electrical measurement, DC electrical conponents, series, parallel, and series-parallel circuit construction. Students gain hands on experience through various laboratory problems. Emphasis is placed on the use of scientific calculators, reading schematics, and the operation of common test equipment used to analyze and troubleshoot DC circuits and to prove the theories taught during classroom instruction.

INT 122: CONCEPTS OF ALTERNATING CURRENT

Class Program
Credits 5 Lab Hours 4 Theory Hours 3
This course provides and advanced study of alternating current (AC) concepts and application principles. Specific topics include safety, terms and symbols, AC electrical theory, components, circuits, electrical measurement instruments, laws of AC, and methods for constructing and measuring various types of AC circuits. Students gain hands on experience through laboratory exercises designed to analyze complex circuits, power requirements, faults, phase relationships, and power factors. Emphasis is placed on the use of scientific calculators and the operation of various types of test equipment used to analyze and troubleshoot the AC circuits.

INT 128: PRINCIPLES OF INDUSTRIAL ENVIRONMENTAL CONTROLS

Class Program
Credits 3 Lab Hours 3 Theory Hours 2
This course focuses on basic knowledge and skills to service perform routine troubleshooting, maintenance, and adjustments of HVACR systems in an industrial environment. After completion, students will be able to perform routine, low-level maintenance on institutional environmental systems. Additionally, students receive instruction to complete the EPA 608 certification examination.

INT 129: INDUSTRIAL SAFETY AND MAINTENANCE TECHNIQUES

Class Program
Credits 3 Lab Hours 6 Theory Hours 1
This course provides instruction in basic maintenance techniques and safety. Topics include drawing, sketching, basic hand tools, portable power tools, stationary power tools, measurement, screw threads, mechanical fasteners, machinery and equipment installation, rigging, and their proper safe operations.

INT 132: PREVENTIVE AND PREDICTIVE MAINTENANCE

Class Program
Credits 3 Lab Hours 3 Theory Hours 2
This course focuses on the concepts and applications of preventative and predictive maintenance. Topics include the introduction to optic alignment equipment, vibration testing and analysis, data collection, job safety, tool safety, systems analysis, preventative maintenance procedures and tasks, and predictive maintenance concepts. Upon completion, students will demonstrate the ability to apply the planning process for proper preventive and predictive maintenance.

INT 139: INTRODUCTION TO ROBOTIC PROGRAMMING

Class Program
Credits 3 Lab Hours 2 Theory Hours 1

This course provides an introduction robotic programming. Emphasis is placed on but not limited to the following: Safety, motion programming, creating and editing programs, I/O instructions, macros, program and file storage. Upon completion the student will be able to safely perform basic functions in the work cell as well as program a robot to perform simple functions.

INT 153: PRECISION MACHINING FUNDAMENTALS I

Class Program
Credits 3 Lab Hours 3 Theory Hours 2
This course focuses on metal cutting machines used to make parts and tools. Topics include lathes, mills, drills, and presses. Upon completion, students will have the ability to use precision measurement instruments and to read mechanical drawings.

INT 158: INDUSTRIAL WIRING I

Class Program
Credits 3 Lab Hours 5 Theory Hours 1
This course focuses on principles and applications of commercial and industrial wiring. Topics include electrical safety practices, an overview of National Electric Code requirements as applied to commercial and industrial wiring, conduit bending, circuit design, pulling cables, transformers, switch gear, and generation principles.

INT 161: BLUEPRINT READING FOR INDUSTRIAL TECHNICIANS

Class Program
Credits 3 Lab Hours 0 Theory Hours 3
This course is designed to provide the student with a comprehensive understanding of blueprint reading. Topics include identifying types of lines and symbols used in mechanical drawings; recognition and interpretation of various types of views, tolerance, and dimensions.

INT 184: INTRODUCTION TO PROGRAMMABLE LOGIC CONTROLLERS

Class Program
Credits 3 Lab Hours 3 Theory Hours 2
This course provides an introduction to programmable logic controllers. Emphasis is placed on, but not limited to, the following: PLC hardware and software, numbering systems, installation, and programming. Upon completion, students must demonstrate their ability by developing, loading, debugging, and optimizing PLC programs.

INT 192: INDUSTRIAL MAINTENANCE TECHNOLOGY CO-OP

Class Program
Credits 3 Lab Hours 6 Theory Hours 0
In this series of courses, students work on a part-time basis in a job directly related to Industrial Maintenance Technology. The employer evaluates the student's performance and the student submits a descriptive report of his or her work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
Prerequisites

Permission of instructor.

INT 206: INDUSTRIAL MOTORS I

Class Program
Credits 3 Lab Hours 6 Theory Hours 1
This course focuses on basic information regarding industrial electrical motors. Upon completion students will be able to troubleshoot, remove, replace, and perform routine maintenance on various types of motors.

INT 207: INDUSTRIAL AUTOMATIC CONTROLS

Class Program
Credits 3 Theory Hours 3

This course focuses on the function of automatic controllers in different modes: on-off, proportional, reset, derivative, ratio, and cascade. Topics include operation of pneumatic, electronic, and computer process control equipment; service of basic process equipment and instrumentation; correct operation and maintenance of valves and pumps; recognizing patterns from data; developing and interpreting control charts; determining control limits; and performing root cause analysis. Upon completion, students should be able to write start-up and shut-down procedures, operate, monitor, and control continuous and batch model plants.

INT 211: INDUSTRIAL MOTORS II

Class Program
Credits 3 Lab Hours 6 Theory Hours 1
This course focuses on advanced information regarding industrial electrical motors. Upon completion, students will be able to troubleshoot, remove, replace, and perform advanced maintenance on various types of motors.

INT 215: TROUBLESHOOTING TECHNIQUES

Class Program
Credits 3 Lab Hours 5 Theory Hours 1
This course is designated to allow students an opportunity to study directly-related topics of particular interest which require the application of technical knowledge and technical skills. Emphasis is placed on the application of skills and knowledge with practical experiences. Upon completion, students should be able to solve job related problems using technical skills and knowledge.

INT 284: ADVANCED PROGRAMMABLE LOGIC CONTROLLERS

Class Program
Credits 3 Lab Hours 1 Theory Hours 2

This course includes the advanced principals of PLC's including hardware, programming, and troubleshooting. Emphasis is placed on developing advanced working programs, and troubleshooting hardware and software communication problems. Upon completion, students should be able to demonstrate their ability in developing programs and troubleshooting the system.